Stick 2 Epoxy Putty is a two component epoxy based putty for repairing,
bonding, sealing and rebuilding virtually any material. Will adhere to
wet surfaces, totally waterproof once dried.
APPLICATION (we always recommend gloves be worn when
handling this product)
Ensure all surfaces are
clean, sound and free of oil and grease. Smooth surfaces should be abraded to
give a good key. Break off the required amount of Epoxy Putty and mix by hand
to a uniform colour. Apply to required areas immediately. Care should be taken
to fill all voids and holes where necessary. On damp or wet surfaces pressure
should be applied to the product until adhesion takes place. Allow to fully
cure before sanding or machining.
Working time from
mixing – 5 minutes @ 20oC
Curing time – 60
minutes @ 20oC