Stick 2 Rapid Epoxy Syringe is an industrial strength, two part clear
adhesive which sets hard in just 10 minutes. Will bond metals, crockery,
glass, wood, concrete, rubber, fabrics, crystal, jewellery and various
hard plasics. Once cured may be drilled, sanded or painted. For industry
and home.
APPLICATION
Ensure surfaces are clean, dry and are free
from flaking material, dust, rust and grease. Roughen surfaces with sandpaper
to improve adhesion.
Remove cap from centre of twin plunger and
snap off tab from bottom of nozzles.
Use plunger to push out equal lengths of
resin and hardener onto a clean disposable surface. Replace cap on nozzles,
Mix thoroughly for 30 secs to 1 minute with
mixing stick provided. Mixed adhesive is usable for only 4 minutes. Only mix
small quantities in one go.
Apply adhesive immediately to both surfaces.
Assemble and hold/clamp until adhesive starts to cure. Note; Adhesive will cure
faster at higher temperatures and conversely, slower at low temperatures.